SWIFT NAVPOD-NT NavComp
SWIFT GPS High Velocity, High Acceleration GPS Receiver
Features:
	All-in-View
	12 Channel C/A Code, L1 Frequency
	High Velocity and Acceleration
	Operates Under Extremely Harsh Environmental Conditions
	INS Integration
	Differential Navigation Mode
	Navigation Data Includes Acceleration and Jerk
The GPS SWIFT is an All-In-View, parallel tracking, 12 channel GPS receiver. The GPS SWIFT is intended for use in platforms that travel at high velocity and accelerations. The GPS SWIFT provides accurate position, velocity, acceleration and acceleration-rate (jerk), as well as time and other GPS data. The system is capable of operating in differential navigation mode, receiving/producing differential GPS corrections, and is also designed for tight-integration with other sensors such as Inertial Navigation Systems (INS). The GPS SWIFT is capable of fast reacquisition during continuous acceleration conditions of up to 15g.

SWIFT NAVPOD-NT NavComp
NAVPOD-NT High Dynamics, Rugged GPS Receiver
Features:
	Navigates With All Satellites In View
	12 Channel C/A Code, L1 Frequency
	Satellite Tracking And Reacquisition In High Velocity And High Acceleration.
	Differential Navigation Mode.
The GPS NAVPOD-NT is an All-In-View, parallel tracking, twelve channel GPS receiver, ideal for demanding Pod and Combat Aircraft applications. It is a fast reacquisition C/A code receiver, which processes navigation data signals transmitted from all satellites in view. In addition to regular navigation data, the NAVPOD-NT also outputs: pseudo ranges, delta ranges, system time, measurement quality and other data required for coupling with Inertial Navigation Systems (INS). The system is capable of operating in differential navigation mode, receiving and producing differential GPS corrections.
Dynamics Velocity: 2000 m/sec Acceleration: 10g Update rate 10 per second Power 15-36 VDC, 14W with 3 receivers operating Interface Port1: RS-422 – Host Port2: Spare Baud rate 9600 – 115200

SWIFT NAVPOD-NT NavComp
The NavComp GGR GPS receiver and a mission computer on a single board. Features: GPS and flight computer Four Antennas Operation On-Board Rolling Platforms Roll and Roll Rate Measurements The different versions include one to four GPS receivers on the same board. This enables the system to be operated with up to four antennas, and to be operating onboard rotating vehicles. The system includes algorithms for vehicle roll and roll rate measurements. Each of the GPS receivers is a 12 channel, L1 C/A code receiver with high dynamics capabilities. The most capable configuration is a 48 channel GPS receiver and a powerful flight computer with four antennas Specifications: Dynamics Velocity: 2000 m/sec Acceleration: 10g Update rate 10 per second Power 15-36 VDC, 14W with 3 receivers operating Interface Port1: RS-422 - Host Port2: SpareBaud rate 9600 - 115200 * Other characteristics available on request